HP P1102/P1606 Laser Engine
Printer History: Released in April of 2010 (P1102, M1130/M1210, P1566/P1606) and September of 2010 (M1536dnf)
Hardware Information: The print speed for the P1100 series & M1212nf is 19 ppm. For the P1606/M1536dnf, the print speed is 26 ppm and 23 ppm for the P1566. The duty cycle for the P1100 series is 5,000 pages per month. For the M1212nf, P1566/1606 and M1536dnf, the duty cycle is 8,000 pages.
OEM Cartridge Information: The P1100 series and M1212n use the same monochrome cartridge (CE285A) with a yield of 1,600 pages. The P1566/1606/ M1536dnf uses a higher capacity toner cartridge (CE278A) yielding 2,100 pages.
Target: SMB
Regional Placement: The P1102w, P1606dn, M1100, M1200 are available worldwide. The P1102 and P1566 are available in Asia Pacific and Europe. The M1212nf is only available in the US.
Standard Builds
- CE278A
- CE285A
Compatible Replacement Chip
HP P1606/M1536 Standard Yield 2.1K, Compatible Replacement - For... More Information
| Build Type | Cartridge | Component | Item Number |
|---|---|---|---|
| Standard | CE278A | Mag Roller | OEM |
| Standard | CE278A | PCR | OEM |
| Standard | CE278A | Doctor Blade | OEM |
| Standard | CE278A | Compatible Replacement Drum | HP1606MKIPNPE |
| Standard | CE278A | Compatible Replacement Toner | HP1606MKI115 |
| Standard | CE278A | Compatible Replacement Chip | HP1606CHIP |
| Standard | CE278A | Compatible Replacement Wiper Blade | HP1505WBLADEK |
| Standard | CE278A | Compatible Replacement Seal | HP1505ESEALP |
| Standard | CE278A | Toner Hopper Drill Guide Fixture | HP1606THHOLD |
Compatible Replacement Chip
HP P1102/M1212 Standard Yield 1.6K, Compatible Replacement - For... More Information
| Build Type | Cartridge | Component | Item Number |
|---|---|---|---|
| Standard | CE285A | PCR | OEM |
| Standard | CE285A | Mag Roller | OEM |
| Standard | CE285A | Doctor Blade | OEM |
| Standard | CE285A | Compatible Replacement Drum | HP1606MKIPNPE |
| Standard | CE285A | Compatible Replacement Toner | HP1102MKI90 |
| Standard | CE285A | Compatible Replacement Chip | HP1102CHIP |
| Standard | CE285A | Compatible Replacement Wiper Blade | HP1505WBLADEK |
| Standard | CE285A | Compatible Replacement Seal | HP1505ESEALP |
| Standard | CE285A | Toner Hopper Drill Guide Fixture | HP1606THHOLD |
Critical Component Analysis
Toner Hopper
| Component | Replacement Frequency* |
|---|---|
| Doctor Blade | 2 |
| Mag Roller | 2 |
| Doctor Blade Sealing End Foam | 3 |
| Drive Gears (2) | 3 |
| Gear Housing End Cap | 3 |
| Mag Roller Bushings (2) | 3 |
| Mag Roller Contact End Plate | 3 |
| Mag Roller Drive Gear | 3 |
| Mag Roller End Cap | 3 |
| Mag Roller End Seal | 3 |
| Mag Roller Scrapers (2) | 3 |
| Seal Exit Port Plug | 3 |
| Toner Hopper Plastic | 3 |
| Toner Hopper Retaining Blade | 3 |
| Cartridge Screws | 3 |
| Compression Springs | 3 |
| Cartridge Screws with Lock Washer | 3 |
| Chip | 1 |
*Cartridge Life - OEM Run Plus 2 Remanufactures
Waste Hopper
| Component | Replacement Frequency* |
|---|
| Component | Replacement Frequency* |
|---|---|
| Drum | 1 |
| PCR | 3 |
| Cartridge Screws | 3 |
| Drum Axle Contact Pin | 3 |
| Drum Bearing Hub | 3 |
| Drum Shutter | 3 |
| Drum Shutter Tension Spring | 3 |
| Recovery Blade | 3 |
| Waste Hopper Plastic | 3 |
| Wiper Blade | 2 |
| Wiper Blade End Felt | 3 |
| Wiper Blade End Foam | 3 |
| Wiper Blade Sealing Foam | 3 |
*Cartridge Life - OEM Run Plus 2 Remanufactures